2.08.14 drivers does not work with CANtieCAR 4.5

[tapi0]

I tried to install drivers for my new CANtieCAR 4.5 and it does not found any drivers for it.
I looked up inside of the tcnbus.inf and ftdibus.inf: there is no DeviceDesc for my CANtieCAR device.

I manually edited those two to add proper DeviceDesc and device id's and got those work.
But then it wants driver for USB Serial Port too and I think that driver is tcnport.inf which does not have correct DeviceDesc and device id nether.

I put those in there also but it still does not work.

I'm trying to install this for Win XP but that should not matter.

[pupu14]

Hello,

Use drivers which are stored on your device built-in storage (SD card).
Or move "CompositeCDCSerial_64.inf" from folder CDC to tieCAR.net, if you let Windows install drivers from that folder only

[tapi0]

Well the drivers on built-in storage are v.2.08.14 at this case.
Those drivers are made in 2011 and supposed to be newest ones.

[Oleksandr]

CANtieCAR use different drivers because it is emulated different usb-devices
read here
- http://tiecar.net/downloads/CANtieCAR_First_Time_Drivers_Installation.pdf
- http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf

[Highland]

Mine still doesn't work, when i try updating the drivers. Windows saids it already have the best driver installed.

Can anyone help?

[tapi0]

Try hardware reset to Loobback – press service button before usb connect and hold if until windows would found the device

- http://tiecar.net/downloads/CANtieCAR_v2x_Service_Flow.pdf


Regards, tieCAR.net Company ::.

This helped to get my CantieCar 4.5 to work and I'm able to use Multiecuscan now.  8)
So thank you!