Recent posts

#21

CANtieCAR / Re: J2534 Toolbox 2

Last post by Oleksandr - November 09, 2023, 11:41:55

When I select the J2534 tab in the configurator, it tells me I am on driver v2.6.1204.

On the device drop down tab, do I select cantiecar or cardaq plus?

the tab is for testing - you can select any driver which is installed on the PC
and if device is attached configurator will read version info from it

#22

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Oleksandr - November 09, 2023, 11:37:59

ok, what do i have to do to get this done? what is the process?

send request to can@tiecar.net
===
- find CANtieCAR on COM-port
- press Copy to Buffer
- paste buffer in e-mail message

#23

Genuine / Re: AVT-852

Last post by Oleksandr - November 09, 2023, 11:35:44

What would it take to get Tiecar to emulate one of these.

https://www.avt-hq.com/852_hw.htm

yes
i have spoken with one old customer
there is not high depand for the mode...
you are second for last 2 years

i remember they have AVT-853 - the same as AVT-852 but with network interface
(AVT-852 and AVT-853 have the same firmware)

#24

Genuine / AVT-852

Last post by Tune EMS - November 07, 2023, 20:55:18

What would it take to get Tiecar to emulate one of these.

https://www.avt-hq.com/852_hw.htm

#25

CANtieCAR / J2534 Toolbox 2

Last post by Tune EMS - November 04, 2023, 01:56:11

does anyone have their cantiecar working on Drew Tech J2534 Tool Box 2? I am trying to set mine up. I assume I need to configure it to "PassThru SAE J2534-1/2 (CAN-Terminator:Auto)"


When I select the J2534 tab in the configurator, it tells me I am on driver v2.6.1204.

On the device drop down tab, do I select cantiecar or cardaq plus?

#26

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Tune EMS - November 03, 2023, 23:39:30

ok, what do i have to do to get this done? what is the process?

#27

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Oleksandr - November 03, 2023, 14:17:38

are you saying I can trade in my v3 for a v5?

Yes
But you will keep the old CANtieCAR v1.x-v3.x

#28

CANtieCAR / Re: Upgrade to CANtieCAR v5.0

Last post by Tune EMS - November 01, 2023, 23:00:19

are you saying I can trade in my v3 for a v5?

[CANtieCAR v5.0]

#29

CANtieCAR / Upgrade to CANtieCAR v5.0

Last post by Oleksandr - October 29, 2023, 10:52:31

CANtieCAR v5.0 on stock now!
Project has been moved to new powerful Cortex M4 MCU.
If you have old CANtieCAR v1.x-v3.x, free transfer configuration to new CANtieCAR v5.0
(Fixed price is used for the upgrade).

#30

CANtieCAR / Re: ELM327 mode - can't connec...

Last post by Oleksandr - September 24, 2023, 18:16:58

will this eventually be available for V3?

No